Strain Gauge Pressure Sensor
TJP-1 Strain Gauge Pressure Sensor
Strain beams are made of special stainless steel and are acid and alkali resistant. This strain gauge pressure cell is widely used in the measurement and control of chemical, metallurgical and other industries.
Specifications of TJP-1 Strain Gauge Pressure Sensor
| Technical Parameter | |
| Rated Load | 5~300 MPa |
| Comprehensive Precision | 0.3~0.5% FS |
| Sensitivity | 1.0~1.5mV/V |
| Creep | ±0.05% FS/30min |
| Zero Output | ±2% FS |
| Temperature Effect On Zero | ±0.05% FS/10℃ |
| Temperature Effect On Output | ±0.05% FS/10℃ |
| Operating Temperature Range | -20~+65 ℃ |
| Threaded Connecting | M20×1.5 or Other Forms |
| Resistance | 350 or 1000 Ω |
| Long Term Stability | ≤±0.3FS/year |
| Insulation Resistance | ＞5000 MΩ |
| Safe Load Limit | 150% FS |
| Bridge Voltage | Reference 10V DC |
| Material | Stainless Steel |
| Load Cell Mode Of Connection | Input+: Red |
| Input-: Black | |
| Output+: Green | |
| Output-: White | |
Dimension Drawing of TJP-1 Strain Gauge Pressure Sensor