TCHS Load cell signal high-speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second, suitable for continuous force measurement, instant force measurement, impact force testing and other test occasions.
1. The load cell can be calibrated through computer software
2. Equipped with corresponding PC software, it can carry out trace analysis on the exported data
3. Sampling time can be set and can be terminated at any time, data will not be lost after power failure.
| Technical Parameter | |
Input Signal | ±20mV |
Power Supply | 9V DC (Built-in 7.4V lithium battery) |
Operating Temperature Range | -20~70℃ |
System accuracy | 0.3%FS |
Data sampling frequency | 10~3500HZ (Adjustable) |
Data storage capacity | According to the storage card, the default is 4GB |
Continuous working time | Determined according to battery capacity and memory card capacity |
Pre-sampling time | 2 seconds |
Data acquisition start mode | External self-reset switch trigger |
Interface | MiniUSB 2.0, |
Data export format | TXT |
Shell size | 110*76*35 mm |
English
日本語
한국어
français
Deutsch
Español
italiano
português
العربية
tiếng việt
ไทย
